Blind tapped hole full thread depth is the usable thread length required by the assembly; it is not automatically the same as the total drilled depth. A blind hole also needs space for tool geometry, incomplete thread, chips and the fastener's end condition as appropriate to the selected process. Define the thread designation, required engagement and bottom geometry separately so the supplier can plan a feasible route. Do not place a fastener into a CAD model and assume the resulting cavity describes a manufacturable thread. The supplier should review the available depth and surrounding material before confirming the final requirement.
The essential drawing distinction is between a space that exists in the model and a thread that can actually perform the intended fastening function.
Begin with fastener engagement
Establish what the screw or mating threaded part must do. Identify its thread, insertion length, end geometry and assembly arrangement. The responsible designer should determine the engagement needed for the joint's material and loads.
Avoid choosing engagement from a universal rule without considering the actual joint. A threaded hole in an aluminum housing and one in a different parent material may require different review.
For CNC milling projects, show the assembled interface or supply the relevant fastener information. The shop can then identify whether the modeled cavity leaves the necessary manufacturing space.
Distinguish the depths on the drawing
| Depth or region | Meaning to establish |
|---|---|
| Usable full thread | Length that must meet the specified functional thread requirement |
| Entry region | Chamfer or lead-in at the opening |
| Incomplete thread or runout | Region that is not full usable engagement |
| Prepared hole depth | Hole required before the thread operation |
| Bottom geometry | Drill point, flat bottom or other specified feature |
| Remaining material | Wall or floor that must not be breached |
Use explicit dimensions or notes that avoid conflicting interpretations. If a bottom shape is not functionally required, let the supplier propose an appropriate route rather than accidentally making a CAD detail mandatory.
A section view can communicate this clearly without crowding the main view.
Leave the process enough room to work
Sandvik Coromant's tapping guidance connects successful tapping to hole preparation, material, tool selection and chip evacuation. Blind geometry makes those inputs important.
Its threading application guide also describes thread-milling alternatives. The right process can depend on the available access and required thread, so ask for a project-specific assessment.
Do not prescribe a generic extra depth copied from an unrelated tool. The supplier needs to establish clearance for the actual tooling and route while preserving the required floor and interface.
Check the surrounding part and final finish
The hole cannot be reviewed independently of nearby features. Identify the remaining bottom wall, adjacent passages, thin sections and any surface that must stay intact.
If the hole receives a coating or is protected during finishing, define its final acceptance state. A usable thread before processing may not be the same as an accepted thread after the final operation.
Through custom machining review, connect the hole requirement to the whole component. Ask for any proposed increase in drill depth or reduction in usable engagement to be stated explicitly for approval.
A manufacturing convenience should not silently weaken the floor or shorten the fastener's intended engagement.
Specify how usable depth will be verified
A general dimensional report may not establish every aspect of a blind internal thread. Agree the verification needed for thread conformity, usable depth and any special bottom feature.
If a particular gauge, fixture or mating-part check is required, provide its requirement before quotation. Record what constitutes acceptance rather than relying on “the screw goes in.”
Before release:
- Confirm the thread designation and fit requirement.
- State the minimum usable engagement.
- Distinguish drill depth and bottom shape.
- Check remaining material and adjacent features.
- Define the final surface condition.
- Agree the relevant thread and depth verification.
This checklist is especially useful when several similar blind holes have different functional roles.
Questions about blind threads
Does the CAD depth represent full thread?
Not necessarily. Model geometry and drawing notes must establish which depth is usable and which includes preparation or runout.
Can a flat-bottomed hole remove every clearance issue?
No. The thread tool, chip behavior and fastener end still need review.
Should the supplier choose the required engagement?
It can advise on manufacturability, while the design authority establishes the joint's functional requirement.
Can every blind hole be made deeper?
Only if the remaining material and neighboring features permit it. Approve such changes on the controlled drawing.
Is a standard screw an adequate inspection tool?
Only where an agreed functional check uses a defined mating component. It is not automatically equivalent to the specified thread-gauging requirement.
Related guides: Thread Milling vs Tapping: Choose for the Actual Hole; Thread Inserts in Aluminum CNC Parts: Decide Before Machining; NPT vs BSPP Machined Ports: Specify the Sealing System.
Submit an unambiguous section
Upload the drawing and assembly details with usable thread length, available hole depth, material and final finish. Ask YXT to identify tooling-clearance or inspection questions before the hole is released to production.




