24 Hours Quote
CUSTOM METAL PARTS

Metal CNC Machining Services
Fast Quotes & Tight Tolerances

01

Diverse Materials

Aluminum, steel, stainless, brass, copper, titanium, and specialist alloys.

02

Advanced Processes

3, 4, and 5-axis milling, CNC and Swiss turning, EDM, and finishing.

03

Drawing-Based Quality

Critical datums, inspection methods, and material documentation reviewed early.

04

Responsive Lead-Time Review

Prototype and production routes planned around geometry, quantity, and finish.

Material traceability availablePrototype through repeat productionGlobal project supportTolerance review per geometry
Transparent precision stainless steel CNC machined housing
MATERIAL OPTIONS

Material Capabilities

Choose the metal around strength, mass, corrosion, conductivity, operating temperature, finishing, and total manufacturing cost.

Aluminum 6061-T6 CNC machined material sample
Aluminum 6061-T6CNC Milled PartConversion Coating
Aluminum

Aluminum 6061-T6

Aluminum 6061-T6 is available for custom Aluminum CNC machining. Final selection should consider strength, corrosion, temperature, finishing, and total manufacturing cost.

Application
Aerospace structures, Robotics, Electronics
Surface
As machined, Bead blasting, Type II anodizing, Type III hardcoat anodizing
CNC Best Practice
Use stable workholding on thin walls to limit vibration and distortion.
View material details
MACHINING PROCESSES

CNC Machining Processes

A connected route from precision cutting through secondary operations and finishing.

Threads Tolerancing
01

3 / 4 / 5-Axis Milling

Pockets, profiles, compound angles, bores, and multi-side geometry with fewer setups.

Complex Geometry
Wall Thickness
02

CNC and Swiss Turning

Shafts, sleeves, fittings, threads, grooves, and small precision components.

Rotational Parts
Aluminum 7075 5 Axis Cnc Machining 2
03

EDM and Complex Features

Wire and sinker EDM support for difficult internal and hardened features.

Hardened Features
Kovar Alloy Parts
04

Secondary Operations

Deburring, grinding, heat treatment, marking, coating, and finishing coordination.

Production Ready

Process Capability at a Glance

Every route is confirmed against material, geometry, quantity, finish, and inspection requirements.

ProcessBest ForCapability FocusPlanning Notes
3 / 4 / 5-Axis MillingComplex prismatic partsMulti-side access and connected datumsEnvelope and tolerance confirmed from the drawing
CNC and Swiss TurningShafts, sleeves, and fittingsConcentricity, threading, and small diametersLength-to-diameter ratio reviewed per part
Wire and Sinker EDMHardened and fine internal featuresTight corners and difficult-to-cut materialsWire or electrode access reviewed before release
Secondary OperationsProduction-ready complete partsDeburring, heat treatment, coating, and markingMasking and finish build-up defined on the drawing
TOLERANCES AND QUALITY

Precision and Compliance Planned from the Drawing

Tolerance, datum, material, finish, and inspection requirements are reviewed as one manufacturing system.

01

Drawing Review

CAD and drawing consistency

02

Material Route

Grade and condition planning

03

Inspection Plan

Datums and methods aligned

04

Finish Control

Masking and build included

Copper Cnc Part 2
DESIGN GUIDANCE

CNC Design Guidelines for Metal Parts

Practical geometry decisions reduce tool reach, setup count, distortion, and inspection complexity.

Hole Depth To Diameter

Minimum Wall Thickness

Use consistent walls and support flexible features to control chatter and movement.

Internal Fillet Radii

Internal Fillet Radii

Match internal corners to practical cutters and avoid sharp deep pockets.

Molybdenum Alloy Parts

Hole Depth-to-Diameter

Keep drilling depth and access realistic for stable tools and chip removal.

Stainless Steel Cnc Machining 2

Threads and Tolerancing

Specify useful thread engagement and reserve tight tolerances for function.

At 1705

Surface Finish Expectations

Define visible, sealing, contact, and protected surfaces on the drawing.

Free DFM Review with Your Quote

Send the CAD model and drawing for feedback on tool access, walls, radii, tolerances, finish allowance, and inspection.

Send Your Drawing
MANUFACTURING EXPERIENCE

Machining and Finishing for Custom Metal Parts

Explore turning, multi-axis milling, heat treatment, blackening, anodizing, passivation, and coating routes for production-ready metal parts.

COMMON QUESTIONS

Frequently Asked Questions

Practical questions to resolve before sending a metal machining project for quotation.

Need to confirm a material, tolerance, inspection method, or finish before quoting? Send the drawing for a practical review.

Get Project Feedback
01

Which metals can YXT review?

+

Common projects include aluminum, stainless steel, carbon and alloy steel, brass, copper, titanium, magnesium, Kovar, molybdenum, and selected superalloys.

A 3D CAD file plus a dimensioned drawing, material, quantity, finish, and inspection requirements gives the clearest starting point.

Finishing can be coordinated when coating thickness, masking, cosmetic standards, and protected features are defined.

Capability depends on material, geometry, feature size, setup access, heat treatment, finish, and measurement method.

The manufacturing route can be adjusted from prototypes through bridge quantities and repeat production.

Models and drawings can be reviewed for tool access, wall thickness, radii, tolerances, finishing allowance, and inspection feasibility.

Send a 3D CAD file, dimensioned drawing, material or grade, quantity, finish, critical features, and target schedule.

START YOUR PROJECT

Get Your Metal Parts into Production

Send the CAD file, drawing, grade, quantity, finish, and critical requirements for a practical manufacturing review.

Request a Quote
WhatsApp